Garage Door Springs Repair
The functionality of the overhead garage door depends on the tension of garage door springs, regardless of whether the garage door swings up in a single panel or rolls up in multiple sections. With the passage of time, these springs may lose their tension or break down which can be rewound or replaced immediately.
It is also essential to understand the importance and functional life of garage door parts involved before conducting a DIY garage door repair project or calling a garage door expert. Click here to contact the right garage door professional.
Garage door components: The garage door runs on the heavy-duty metal tracks attached to the walls of the garage. There are several types of garage doors with respective hardware, material, and another operating system.
- Swing-up garage door: This type of garage door runs on the horizontal tracks which are mounted high on the walls of the garage. These metal tracks should slant down slightly toward the backward direction of the garage. The powerful and heavy-duty springs are connected on either side of the garage door frame and hooked to the garage door itself. Even if your garage door springs are in a good working position, it is worth inspecting the brackets around the springs to find loose hardware including screws and mounting plates.
- Roll-up garage door: In this type of garage door, the metal tracks are mounted which curves from vertical to horizontal position in order to roll the garage door towards the backward direction. Springs are used to counterbalancing the weight of the garage door. The tension of springs is controlled by cables and pulleys. You can readjust the tension on your own by pulling the metal cable and re-tying the knots in order to increase or decrease the length of the cables.
Note: If you have one spring placed at the center of the garage door, it is extremely important to call a garage door technician rather than trying to fix or replace the springs on your own. It is essential to avoid injuries.
Garage door springs services: Even the project of multiple torsion springs replacement can be challenging to handle on your own. If you don’t feel yourself up to the challenge, make sure that you have brought the right spring. You should be familiar with the winding bars and tension which will enable you to ease on a new placement. Winding the springs means dealing with the stored energy which can lead to injuries and damages if you are not extremely careful.
There are many useful online tutorials online for the garage door spring replacement process. But there are few important tips to keep in mind. First of all, close the garage door completely and disconnect the garage door opener, then place a ladder to one side of your working area, avoid covering the way of the winding bars. Always keep a strong grip on the winding bars and fully insert them into the winding holes of the springs. Be careful because over-winding will make the garage door bounce up while underwinding will make the garage door hard to operate.
If you have any confusion, don’t hesitate to call a garage door spring specialist. Safety should be the first consideration. It may not be worth risking your life by conducting it yourself.