Garage Door Repair Project

Most garage door repair projects should be done by professional garage door companies such as garage door repair in Stonecrest, GA that does garage door installation and repair projects as they have right tools and knowledge. They can handle all complex garage door problems that you cannot handle on your own if you are not moderately mechanical inclined.

There are two main parts of the garage door that need to be fixed. It could be the garage door opener and the garage door itself. With a sufficient amount of time, effort, and patience they can easy to fix it. If you have decided to handle the garage door project on your own, make sure that you follow all safety measurements.

In order to determine where the garage door problem is you need to conduct a detailed test. One of the simplest tests is to check the working condition of the garage door opener. Perform this test to see if you are able to open and close the garage door without any issue. To test the performance of your garage door, you need to operate them manually. If it creates grinding sounds or it is hard to move then the garage door structure is the problem.

The garage door moves through rollers on metal tracks that are attached to the walls of the garage. The heavy-duty torsion springs are used to generate and release the power to lift and lower the garage door. While working on your garage door, you should always check the hardware first to check if there is an issue with the operating system of the garage door.  

While performing a garage door repair project, the first step is to inspect the metal tracks of the garage door. You should tighten the mounting brackets that are used to secure the tracks to the walls. These brackets tend to become loose over time. Inspect the garage door thoroughly while keeping it closed to find out the dents, bumps, and other breaks on the tracks. To fix the dented area, use a hammer.

Make sure that they are cleaned and aligned properly using a carpenter’s level. The vertical tracks of the garage door have to be exactly straight while the horizontal tracks need to be downward slant. Make sure that the tracks are aligned correctly and they must be parallel to each other. If you feel any issue, you just need to lose the screws and bolts but don’t remove them completely and then make necessary adjustments.

To ensure the smooth operations of the garage door, you should clean and lubricate the hardware of the garage door periodically including rollers and tracks. Inspect the garage door springs periodically to make sure that there is no sign of wear and tear. Professional garage door technicians will help you to do routine maintenance over time so that the garage door parts will be kept in the correct alignment.